产品中心

联系我们

名称:保定巨盛模具制造有限公司

电话:13833064090

手机:15188633222

地址:河北省保定市清苑区闫庄工业园

新闻动态
水沟电缆槽移动模具
水沟电缆槽移动模具包括行走系统及定位系统。在行走钢轨上安装好水沟电缆槽台车的各个部件,调试好后可以快速施工水沟电缆槽。
The moving die of the trench cable groove includes the walking system and the positioning system. All parts of the trench of the trench are installed on the walking rail, and the trench cable groove can be constructed quickly after the debugging is good.
该水沟电缆槽移动模具长12m,与衬砌台车长度一致,确保每环水沟电缆槽施工缝能与衬砌施工缝一致,能确保仰拱沉降变形后不会拉裂水沟电缆槽。
The movable groove of the water trench cable slot is 12m long, which is consistent with the length of the lining trolley. It is ensured that the construction joint of each ring groove can be consistent with the lining construction joint, which ensures that after the inverted arch is settled and deformed, it doesn't split the water trench cable slot.
该模具可循环使用,简单环保,4人操作,月进度平均360m,最高月进度可达500m。
The mold can be recycled, simple and environmentally friendly, 4 people operate, the monthly progress average 360m, the maximum monthly progress up to 500m.
二、适用范围
Two. Scope of application
适用于隧道水沟电缆槽施工。
It is suitable for the construction of tunnel water trench cable groove.
三、应用情况
Three. Application situation
该水沟电缆槽移动模具使用后能确保每环水沟电缆槽施工缝能与衬砌施工缝一致,能确保仰拱沉降变形后不会拉裂水沟电缆槽。
The movable die of the trench cable slot can ensure that the construction joint of each ring groove can be consistent with the construction joint of the lining, so that the inverted channel can not be cracked after settlement and deformation.
该模具可循环使用,简单环保,操作人员少,施工速度快,成型水沟电缆槽美观,各项标准满足验收要求,极具推广价值。
The mold is recyclable, simple and environment-friendly, with few operators, fast construction speed, beautiful shape, and all kinds of standards meet the acceptance requirements.
局限与建议:该模板长度固定,每循环搭接长度不能过长,否则会损坏上一环成型水沟电缆槽,短衬砌和洞室处无法用该模具,可使用特制木模和钢模进行补缺。
Limitations and recommendations: the template of fixed length, each cycle of the lap length should not be too long, otherwise it will damage a ring forming ditch cable trough, short tunnels lining and cannot use the mold, can be filled with special wood and steel mould.

联系方式

  1. 名称:保定巨盛模具制造有限公司
  2. 电话:13833064090
  3. 手机:15188633222
  4. 地址:河北省保定市清苑区闫庄工业园

版权 © 保定巨盛模具制造有限公司 网址:dianlancaom.75ix.com  推荐:电缆槽模具,流水槽模具,检查井钢模板,隔离墩钢模具

网站建设及优化保定遨游网络公司