水沟电缆槽移动模具包括行走系统及定位系统 |
添加时间:2020/11/28 13:56:43 浏览次数: |
水沟电缆槽移动模具包括行走系统及定位系统。在行走钢轨上安装好水沟电缆槽台车的各个部件,调试好后可以快速施工水沟电缆槽。 The mobile mould for the trench cable trough includes a walking system and a positioning system. After installing all parts of the trench cable trough trolley on the walking rail, the trench cable trench can be constructed quickly after debugging. 该水沟电缆槽移动模具长12m,与衬砌台车长度一致,确保每环水沟电缆槽施工缝能与衬砌施工缝一致,能确保仰拱沉降变形后不会拉裂水沟电缆槽。 The movable mould of the trench cable trench is 12m long, which is consistent with the length of lining trolley, so as to ensure that the construction joint of cable trench in each ring of ditch can be consistent with that of lining construction joint, and that the cable trench will not be cracked after the settlement and deformation of inverted arch. 该模具可循环使用,简单环保,4人操作,月进度平均360m,最高月进度可达500m。 The mold can be recycled, simple and environmentally friendly. It can be operated by 4 people. The average monthly progress is 360m and the maximum monthly progress is 500m. 二、适用范围 2、 Scope of application 适用于隧道水沟电缆槽施工。 It is suitable for the construction of cable trench in tunnel. 三、应用情况 3、 Application 该水沟电缆槽移动模具使用后能确保每环水沟电缆槽施工缝能与衬砌施工缝一致,能确保仰拱沉降变形后不会拉裂水沟电缆槽。 The movable mould can ensure that the construction joint of each ring of trench cable trench is consistent with the lining construction joint after the use of the movable mould, which can ensure that the cable trench will not crack after the settlement and deformation of inverted arch. 该模具可循环使用,简单环保,操作人员少,施工速度快,成型水沟电缆槽美观,各项标准满足验收要求,极具推广价值。 The mold can be recycled, simple and environmental protection, less operators, fast construction speed, beautiful forming ditch cable trough, all standards meet the acceptance requirements, and has great promotion value. 局限与建议:该模板长度固定,每循环搭接长度不能过长,否则会损坏上一环成型水沟电缆槽,短衬砌和洞室处无法用该模具,可使用特制木模和钢模进行补缺。 Limitations and suggestions: the length of the formwork shall be fixed, and the overlapping length of each cycle shall not be too long, otherwise, it will damage the cable trough of the formed ditch in the upper ring, and the mold cannot be used at the short lining and cavern, and the special wood formwork and steel mold can be used to make up for the defects. |
上一页 检查井砌筑技术要点 |
下一页 电缆槽模具材质 |
Copyright © 技术支持:遨游网络