保定巨盛模具制造有限公司

Composite SMC cable slot

材质：玻璃纤维增强型不饱和聚酯树脂（SMC）

Material: glass fiber reinforced unsaturated polyester resin (SMC).

复合材料SMC电缆槽结构及性能要求：

The structure and performance requirements of composite SMC cable slot:

复合材料SMC电缆槽采用板块组合模式，板材采用新型SMC复合材料在高温高压下一次模压成型，具有高强度，高模量和良好的抗撞击性

The composite SMC cable slot is composed of plate combination mode. The plate is molded with a new type of SMC composite at high temperature and high pressure. It has high strength, high modulus and good impact resistance.

纤维增强不饱和聚酯（SMC）材料具有三维网状结构，多功能填料，特种纤维增强的特点，采用高性能的工程材料，必须具备以下性能：

Fiber reinforced unsaturated polyester (SMC) material has a three-dimensional network structure, multi-functional packing, special fiber enhancement characteristics, high performance engineering materials, must have the following properties:

1、具有良好的电气绝缘性能和优异的耐介质性，对酸碱等介质的耐腐蚀性能好。

1. It has good electrical insulation performance and excellent dielectric resistance, and has good corrosion resistance to acids and alkalis.

2、高阻燃性能，符合GB/T5169.16-2008的标准要求。

2, high flame retardancy, in line with GB/T5169.16-2008 standard requirements.

3、良好的隔热防护性能，导热系数只有金属材料的1/100，在户外高温运行的条件下，对电气设备具有良好的热防护作用。

3, good thermal insulation protection performance, thermal conductivity of only 1/100 metal material, under the conditions of outdoor high temperature operation, the electrical equipment has a good thermal protection.

4、良好的机械强度,其拉伸强度、弯曲强度，抗冲击性能等指标优越，密封性能良好。

4, good mechanical strength, its tensile strength, bending strength, impact resistance and other indicators superior, good sealing performance.

5、设计造型美观，耐候性强。内外表面光洁、平整，产品颜色为材料原色，不需喷涂，不退色，防老化，复合材料SMC电缆槽使用寿命为≥50年。

5. The design is beautiful, and the weatherability is strong. The interior and exterior surfaces are clean and smooth,dimai.75ix.comhedao.75ix.com niuyang.75ix.comtongban.75ix.com lixinb.75ix.com daozhu.75ix.com the product color is material primary color, no spraying, no fading, and anti aging. The service life of composite SMC cable trough is more than 50 years.